Skip to content

Enclosed & Lit

Court Lighting & Fencing in Orange County

A fully enclosed, evenly lit court you can use after dark without glare complaints or lost balls.

  • On-Site Evaluation
  • Written Estimate
  • Final Walkthrough
  • Backyard to HOA
A tall light pole with multiple large floodlights arranged in a circular pattern against a clear blue sky.

Done Right vs. Done Cheap

Where lighting and fencing installs fall short

The gap between a functional court and a frustrating one usually comes down to a few specific decisions made during installation.

Uneven Light Coverage

Fixtures placed by count rather than by coverage map leave dark zones at baselines where most play happens.

Coverage-Mapped Placement

Each fixture is positioned and aimed against the actual court layout, eliminating shadows before poles are set.

Glare onto Neighbors

Fixtures aimed too high or angled outward push light spill into adjacent yards, drawing complaints from neighboring properties.

Glare Control by Design

Fixture aim and mounting height are set to keep light on the court surface and off surrounding properties from the start.

Weak Post Setting

Posts set in shallow or undersized footings shift over time, loosening the fence line and creating gaps where balls escape.

Concrete Footings Sized to Load

Aluminum posts are set in concrete footings sized for the fixture load and local wind conditions, not a one-size depth.

Gates That Don’t Function

Gate swing direction and latch type decided on-site after fencing is up often require rework and leave the enclosure incomplete.

Gate Layout Confirmed Early

Swing direction and latch type are confirmed during the layout stage so the gate functions correctly from day one.

Common problems, answered

Scope of Work

What court lighting and fencing covers

From a single fixture replacement to a full perimeter enclosure with LED lighting, the scope is set in writing before work begins.

Basketball Court Lights & Fence

LED fixtures and chain link enclosure sized for a full court.

Tennis Court Enclosure

High-perimeter fencing with vinyl-coated mesh and gated entry.

Pickleball Court Lighting

Compact LED layout for smaller court footprints.

HOA Court Upgrades

Fencing and lighting that meets community appearance standards.

How It Works

Lighting and fencing that make a court usable after dark and fully contained

A court without proper lighting and enclosure loses half its usable hours and most of its balls.

Request a Site Evaluation

Lighting planning starts with coverage mapping across the full court surface. LED fixtures are positioned and aimed to eliminate dark zones at the baselines and sidelines, where most play happens. Glare control is part of the plan from the start, keeping light spill off neighboring properties and meeting HOA requirements common across Orange County communities.

Fencing is specified by height and mesh type based on the sport and site. A standard court enclosure uses galvanized chain link with a vinyl-coated finish, set on aluminum posts with concrete footings. Gate swing direction and latch type are confirmed during layout so the finished enclosure functions correctly rather than requiring adjustment after installation.

Light poles and fence posts are set in concrete footings sized for the fixture load and local wind conditions. Fixture aiming is adjusted on-site once poles are set, not pre-set at the factory, so coverage accounts for the actual court orientation. A final walkthrough checks even illumination, gate operation, and fence line integrity before the job is signed off.

Why Us

Why Orange County Sports Courts for lighting and fencing?

Lighting and fencing are finishing work, the details that determine whether a court is actually usable. Here is how we make sure the job holds up.

On-Site Evaluation Before Any Commitment

The site visit happens first. No scope is written until the ground is seen in person.

Itemised Written Estimate

Fixtures, poles, fencing, gates, and footings are listed as separate line items, not bundled into one number.

Backyard to Commercial Scale

We arrange installs for residential courts, HOA facilities, and larger commercial properties across Orange County.

Final Walkthrough on Every Job

Coverage, gate swing, and fence line integrity are checked and confirmed before the job is signed off.

No Work Booked Without Written Scope

Nothing is scheduled until you have a written estimate covering every stage, so there are no surprises mid-job.

Aerial view of multiple illuminated tennis courts at night with bright floodlights.
Finished regulation tennis court with acrylic surface and crisp white line striping backyard

The Process

From first call to finished court

Request a Site Evaluation

  1. 01

    Request an Evaluation

    Tell us the site, the sport, and what you need, and we schedule a visit to assess the space.

  2. 02

    Review Your Written Estimate

    You receive an itemised estimate listing fixtures, poles, fencing, gates, and footings before any work is booked.

  3. 03

    Installation & Sign-Off

    The builder installs and aims fixtures on-site, sets posts in concrete, then walks the finished job with you.

Pricing Estimates

Typical Court Lighting & Fencing Prices

WorkTypical project cost
Court fencing$5,000-$15,000
Court lighting$10,000-$30,000
These prices are estimates and often vary with the condition, size and scope of each job. Message or call us for a free, no-obligation quote.
See all prices

Common Questions

Questions about court lighting and fencing

  • Do I need both lighting and fencing for my sports court, or just one of them?

    You can install either one independently, but most courts benefit from both. Fencing keeps play contained and defines the court boundary; lighting extends usable hours into the evening. If you only play during daylight and your yard has natural barriers, fencing alone may be enough. A site evaluation will confirm what your specific layout actually needs.

  • Will court lighting cover the whole playing area without dark spots?

    Yes, when fixtures are positioned correctly. Pole placement, beam angle, and lumen output are calculated to overlap coverage zones across the full playing surface. A proper layout eliminates the shadow gaps that single-pole or poorly aimed setups create. The on-site evaluation maps your court dimensions before any fixture positions are confirmed.

  • Can the lights be too bright for my neighbors?

    Yes, poorly aimed fixtures can spill light onto neighboring properties. Directional LED fixtures with cutoff shields keep the beam focused on the court surface and reduce light trespass significantly. Pole height and aiming angle are set during the planning stage with neighbor impact in mind. Many Orange County municipalities also have outdoor lighting ordinances that set measurable limits.

  • Will a fence keep balls from leaving the court?

    A properly sized fence stops the vast majority of errant balls. Chain-link at 10 feet handles basketball and pickleball well; tennis typically needs 12 feet or higher on the baseline ends. No fence stops every ball at extreme angles, but the right height for your sport reduces retrieval interruptions substantially.

  • What fence height works best for my court layout?

    Height depends on the sport and which side of the court you are fencing. Pickleball and basketball courts generally use 10-foot fencing; tennis courts use 10 feet on the sides and 12 feet behind the baselines. Courts near streets or slopes may need additional height. The site evaluation confirms the right spec for your layout.

  • What if my posts, wiring, or court surface need extra work before the lighting and fence go in?

    Pre-existing issues like corroded conduit, cracked footings, or a deteriorated surface do add cost. The itemised written estimate produced after the site evaluation breaks out any remediation work separately so you can see exactly what is driving the total. Skipping that prep work risks fixture failure or fence movement within the first season.

  • How can I tell whether I need a full install instead of a cheaper patch or handyman fix?

    If your existing posts are corroded at the base, your wiring lacks weatherproof conduit, or your fixtures are misaligned and causing dark spots, a patch rarely holds. Handyman repairs on structural fence posts or electrical runs often fail within a year because the root cause is not addressed. A site evaluation identifies whether the underlying infrastructure is sound enough to repair or needs replacing.

  • What materials hold up best for outdoor weather and regular use?

    Galvanized steel posts with vinyl coating resist rust and UV degradation better than bare steel or aluminum alone. For lighting, IP65-rated LED fixtures handle rain and humidity without corrosion. In coastal Orange County areas, marine-grade hardware on fence fittings adds meaningful longevity where salt air accelerates oxidation on standard components.

More questions about Court Lighting & Fencing?

Get a Written Estimate for Your Court

Tell us the site and the sport. We’ll schedule a site assessment and put the full scope in writing before anything is booked.

Request a Site Evaluation